Evaporators

A small stainless syrup pan for someone with a couple taps or someone who is looking for a small pan to finish their syrup in. It could be put righ...

A replacement 2'x2' syrup pan for either a 2'x4' or a 2'x6' Leader WSE evaporator. This is a 3 section welded syrup pan. It does not come with a va...

A 3-section tig welded stainless syrup pan. This pan measures 24"x33" and has a 1/2" fitting (female threads) on 2 opposite corners to draw off fro...

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

A replacement 4 section welded syrup pan. This pan has the wire hangers in it for the Z arm regulator to hook to. Hooks up to a Leader Patriot flue...

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

Leader 2x4 Vermonter Pan (raised flue)

2x6 Set of WSE Raised Flue Pans w/Fitting Kit. While we try to keep this item in stock, you should call for availability.

This set of pans comes with a 2'x4' raised flue pan and a 2'x2' four section syrup pan. The Flue pan can be ordered with the float box on either si...

CDL 16" Welded Preheater Pan (16"x8"x8")

A stainless welded preheater pan for the CDL 18" wide evaporators. Comes with a valve. This pan measures 18" wide x 6" long and 10" deep. This pan ...

A stainless preheater/reservoir pan for a Leader 1/2 Pint evaporator. This pan measures 24" wide, 7" long and 7.5" deep. It comes with a valve, and...

2'x3' Welded Syrup Pan with a 1/2" draw-off fitting and a 1/4" fitting for a thermometer.  Draw-off valve and thermometer are sold separate. 

2' Preheater Pan for Hobby Evaporator. 24" wide x 6" and it is 8" deep/tall.  Has a 1/2" fitting with female threads for a valve.