Evaporator Accessories

A Murphy cup removes the need for temperature calculations. The dial is a thermometer, with the temperature face removed and replaced with the appr...

2" in diameter; 8" tall for use with the Short Syrup Hydrometer

12" tall; 2" diameter

Baume & Brix scale 25°-40° Baume, 45°-75° Brix. Red lines at hot and cold test. 9 3/8" long - can be used with any of our hydrometer cups, but ...

Brix scale 50°-71°. Red lines at hot and cold test. 12" long - needs the Long Hydrometer Cup State of Vermont inspected Click for directions on usi...

Brix scale. 1°-12°Brix calibrated at 38°F State of Vermont inspected Hydrometers are fragile, glass instruments. They must be handled very cautious...

Brix scale, 1°-12° Brix calibrated at 38° F. Divided into 1/10° Brix increments. State of Vermont inspected Hydrometers are fragile, glass instrume...

Works with a Long Style Hydrometer Cup. Will not work in a short cup. Brix scale 0°-35° for checking high concentrate State of Vermont inspected H...

A hydrotherm combines a hydrometer and a thermometer into one unit. Just float the hydrotherm in syrup and when the red/blue line is level with the...

45°-82° Brix

0°-18° Brix Sap Refractometer.

These firing gloves are great for loading wood into the arch. 12" from the tip of the finger to the end of the cuff. This thick gloves will help pr...

Rubber Gloves for Hot Syrup or Water, 12" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

Hanna Digital Thermometer, 5" stem

Hanna Digital Thermometer, 12" stem

Smoke Stack Thermometer

3" Dial 0 - 50 Degrees 6" Stem Thermometer

3" Dial Thermometer, 0-50 with 6" Stem and Swivel Head

3" Dial 0 - 50 Degrees 9" Stem Thermometer

3" Dial, 0-50 Degrees, 12" Stem Thermometer

3" Dial 20 - 240 Degrees 6" Stem Thermometer

3" Dial 20 - 240 Degrees 9" Stem Thermometer

5" Dial 0 - 50 Degrees 6" Stem Thermometer

5" Dial 0 - 50 Degrees 9" Stem Thermometer

5" Dial 20 - 240 Degrees 6" Stem Thermometer

5" Dial 20 - 240 Degrees 9" Stem Thermometer

Thermometer Bracket for Welded Pan (for digital or dial therm.)

A replacement 1/2" diameter glass tube that is 12" long for a standard sight gauge.

This replacement glass tube is for Leader's Max flue pans. It has a 1/2" diameter and is 18" long.

Sap Level Gauge Gasket.

Brass Washer for Sap Level Valve.

A digital meter that tells you the barometric pressure in inches of mercury and the boiling point of water in degrees of Fahrenheit based on the ba...

H2O 2" Modulating Automatic Draw-off with Barometric Compensation, Motorized Valve, Controller and Probe. Comes with the down spout. Has a 2" tri-c...

Most producers that have tried an automatic drawoff could not imagine boiling without one again. This is a full feature Max Marcland automatic draw...

V11 - 1" Motorized Stainless Ball Valve only. This is a spare valve for use with a Marcland Max or Mini Automatic drawoff.

This is a spare/replacement temperature probe for an automatic drawoff. A spare probe can make changing drawoff sides much easier. Just change the ...

Temp. Probe Clip for Marcland Auto Drawoff temperature probe. This clip gets attached to the pan with a bolt (not included) and then the temperatur...

A rubber plunger for the inside of the Solenoid valves. This little rubber piece is what forms the seal inside the solenoid valve.

Small Stainless Skimmer

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

The difference between a large scoop and a small scoop is just the width of the scoop. A large scoop is about 5.5" wide, but this small scoop is on...

The difference between a large scoop and a small scoop is just the width of the scoop. A large scoop is about 5.5" wide, so you would need to make ...

This hardwood handle fits into the end of either the large or small scoop or skimmer. This handle measures 16" long, and you do not have to worry a...

A brush with a 9" handle that works well for cleaning the syrup pan, buckets or other objects in the sugarhouse that need a good scrubbing.

A brush with a 20" handle that works well for cleaning the syrup pan, buckets or other objects in the sugarhouse that need a good scrubbing.

A brush for cleaning the soot side of the Max flue pans. This brush is designed to help you get up in the deeper flue pans. Stiff bristles helps th...

A brush for cleaning the soot side of flue pans. Stiff bristles helps this brush remove the soot so that you can get a better heat transfer and kee...

A triangled shaped brush designed to get down in between the flues on the back pan. Works with raised or drop flues. 10" from the handle to the bot...