Arch Supplies

Fire Brick 1/2 Size. 1 1/4" Thick x 4 1/8" Wide x 8 3/4" Long. This brick rated for temperatures up to 3000 degrees Farenheight.

Fire Brick Standard 2 3/8" Thick x 4 1/8" Wide x 8 3/4" Long. This firebrick is rated for up to 3000 degrees Farenheight.

The woven gasket holds up better, and therefore will last longer than the standard pan gasket. Woven gasket is designed to go on the railing of the...

Using a pan gasket will help you get a tighter seal between the arch and pans to keep the heat where you want it, under the pans. This gasket is us...

Using a pan gasket will help you get a tighter seal between the arch and pans to keep the heat where you want it, under the pans. This gasket is us...

A wider pan gasket used to protect the stainless on the railing of the evaporators. This is put down and is wide enough to tuck inside the ceramic ...

Insulating Arch Board 1" thick by 12" wide and 3' long. The arch board is used to line the arch before the firebrick is placed in the arch. It is s...

Used in oil fired arches, or on the doors for an airtight front wood arch. This blanket can also be cut to certain dimensions and used in between t...

Tube of High Temperature Fire Caulking.

A light weight insulation used for insulating a wood fired evaporator between the baffolds. Using vermiculite will do a better job insulating than ...

This pail of cement is premixed and ready to use. On average customers can cement between 100-110 bricks out of a single 50lb pail.

This pail of cement is premixed and ready to use.

These firing gloves are great for loading wood into the arch. 12" from the tip of the finger to the end of the cuff. This thick gloves will help pr...

Rubber Gloves for Hot Syrup or Water, 14" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

Stainless Steel Pins for Insulating Arch.

Stainless Insulation Clip

Bolt-On Regulating System with Float.For use with all welded Half Pint and Supreme BoilingPans.

A replacement float for a Grimm or Leader hot sap float. This float measures 8.5" x 4.5". They now are making them with a crank on the top which al...

This stainless welded float is used for the flue pan for many of new Leader evaporators. It measures 5 1/2" wide and is 10 3/4" long. It has a cran...

A stainless welded float that is 5" wide and 8.5" long. This float is for the syrup pan on a Small Brothers evaporator. It has a hole on each side ...

A stainless welded float that is 6 1/8" wide and 12" long. This float is for the flue pan on a Small Brothers evaporator. It has a hole on each sid...

The Z arm hot sap regulator. This is used on a Grimm evaporator or the Leader Patriots. If you need one of these it is best to call in the order. T...

This is the cold sap regulator for many of the old Small Brothers evaporators where the feed was coming in from the bottom. The bottom of this item...

Small Brothers Flue Pan Regulator Arm

1/3 lb (no lead) Solder (stainless steel & tin solder).

4 oz Soldering Flux

This is the rubber regulator packing used in a Z arm for a Grimm evaporator or the older Leader Patriot evaporators. This packing was used for the ...

This thin rubber packing is used for the cold sap regulator on many of the Leader and Grimm evaporators. Leader has also started using it on the re...

This regulator packing is a soft material almost like a foam. It is 3/16" thick and 1 3/4" in diameter. It is used on many of the old Small Brother...

A thick white regulator packing that is a spongy rubber material. It is about a 1/4" thick and is 3 3/8" in diameter. Can be used in the hot or col...

A stainless washer that is used on the pan connections between the flue pan and the syrup pan on a Grimm raised flue evaporator or a Leader Patriot...

A rubber washer that is used in the pan connections between the flue pan and the syrup pan on a Grimm raised flue evaporator or a Leader Patriot.

A 2 3/8" rubber washer for a Grimm evaporator.

A 2 3/8" Metal washer for a Grimm evaporator.

A rubber hose connection that is used on the Leader American pans, as well as some of the older evaporators. These hoses measure 2" in diameter and...

A replacement hose that measures 2"x2". These rubber hoses are used to hook a float box on to the evaporator, and can handle the heat of hot sap go...

This hose is used for hooking a line up to the cold sap float box. Used on the Leader WSE evaporators and also some of the older styles. Stainless ...

The elbow for Grimm Raised flue pans or Leader Patriot pans that goes on the 1" threaded nipple that sticks into the syrup pan. This is the elbow t...

A stainless nut used on the Grimm or Leader Patriot evaporators for hooking the flue pan up to the syrup pan. Some of the old nuts we galvanized or...

A hot sap regulator for a Small Brothers evaporator. The yoke goes over the elbow and hangs on the 1" feed pipe to the front pan. There is a piece ...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

Electric Rheostat (Control Only).

A regulator arm for a Leader cold sap float box.

Small Sap Regulator Bridge.

A 2" stainless plug used in the Leader Patriot and Leader American evaporators for reversing the flow of sap through the flue pan.

A blower designed for a Leader 1/2 pint evaporator. Using a blower will help you get more out of your wood and cause the evaporator to boil harder....

Please call in to order this item. We need to know if you would like a 60 degree solid or a 45 degree hollow nozzle and what size gph nozzle.

A piece of insulating blanket for use between the pans on a 2' wide arch. This blanket will come 6"x24" and is 1" thick.