Products

2'x3' Welded Syrup Pan with a 1/2" draw-off fitting and a 1/4" fitting for a thermometer.  Draw-off valve and thermometer are sold separate. 

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...

2'x4' Stainless Hood.

2'x5' Leader Welded Finishing Pan (New, factory second).

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

2'x6' Leader Patriot Evaporator. This evaporator comes with a stainless wood fired arch, stainless base stack and 3 sections of 10" stainless round...

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

The outer shell on this tank has some holes in it, but the stainless liner inside is in very good shape.

2,111 Gallon Lapierre Stainless Tank (5'Wx16'Lx50 1/2"H).

A brush with a 20" handle that works well for cleaning the syrup pan, buckets or other objects in the sugarhouse that need a good scrubbing.

A complete 20" filter cartridge housing. This unit has the bottom piece that holds the filter and also the top plastic piece that the inlet and out...

A 20" cartridge 5 micron filter used to filter sap before it goes into an RO. There are 24 filters in a full case, but they are sold individually.

20" Rope Operated Stack Cover

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

20" Stainless Smoke Stack

20"x66" CDL Evaporator w/Welded Raised Flue pan and Cross Flow Syrup. Comes with stack and a stack cover. New. Discontinued model, and this is the ...

20"x84" CDL Evaporator Drop Flues and Two Cross Flow Syrup Pans, New. Comes with a Stainless Arch, Stack, and Cover.  Discontinued Model. 

Genugel used for making maple jelly. 

This flask bottle is smooth on both the front and the back, though the back is slightly concave. The bottle measures approximately 3" wide and 6.5...

21"x21"x18" Stainless Welded Pan with Stainless Cover and Handles. This is pan was made with a thicker stainless. It has a 1/2" draw-off fitting an...

210 Gallon Pickup Tank. Molded to fit around wheel wells of full size, American-made pickups. Low profile for better rear vision. Fill opening offs...

22" Diameter Round Open Topped Draw-off Tank w/Valve and Wooden Stand. Stands 21" tall. 

22" Rope Operated Stack Cover

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

22" Stainless Smoke Stack.

225 Gallon Horizontal Tank. This tank has a 2" fitting with Female threads on the end of it. The Tank Measures: 38" wide x 49" long x 41" high and ...

230 Gallon CDL Stainless Storage Tank (3'Wx4'Lx3'H)

233 Gallon H2O Tank (4'x4'x36") non elevated frame. There is a 2" fitting with female threads on the bottom for a drain.

These paper prefilters are most commonly used in canning units. They are designed for single use, however can be rinsed with hot water and reused a...

This is the most commonly used filter in any of the gas canning units. It is a little oversized to overhang the sides so that the syrup does not wo...

A 3-section tig welded stainless syrup pan. This pan measures 24"x33" and has a 1/2" fitting (female threads) on 2 opposite corners to draw off fro...

25# H2O Powder RO Soap.

Used 250 +/- Gallon Plastic Square Tank with a valve. 

A decorative bottle with a maple leaf on the front. The bottle has a base of 2.25" x 1.5", with a height of 7.75", and holds 250 ml or 8.45 ounces....

There is a decorative bottle with small handle on the bottle and a maple leaf engraved both the front and back of the bottle. The bottle measures a...

A decorative bottle in the shape of a gingerbread man is 3.75" wide and stands 7" tall. He holds 250 ml or 8.45 ounces. This fun little bottle is s...

A Glass bottle in the shape of a log cabin. This bottle holds 250 ml or 8.45 ounces. There are 12 bottles in a case. All bottles come with covers a...

A glass bottle in the shape of a maple leaf.  The back of the bottle is smooth so you can put a label on it, or you could use a hang tag. The bottl...

A glass bottle in the shape of a maple leaf, with a tree embossed on the front, and "Maple Syrup" under the tree. The back of the bottle is smooth ...

This decorative little bottle has a festive sugar house printed on the front. There is room to put a label on the back of the bottle, though many p...

A glass LaBasqu bottle with a festive wreath printed on the front. There is room to put a label on the back of the bottle, though many people prefe...

A glass bottle with a square base, that has a maple tree with a bucket printed on one side of the bottle. The other three sides are plain. The bott...

A unique glass bottle that has a half maple leaf embossed on the front and the other half on the back. This bottle holds 250 ml or 8.45 ounces. It ...

A glass jug with a handle. The state of New Hampshire, the words "State of New Hampshire Pure Maple Syrup", as well as the size of the container, 2...

A glass bottle in the shape of a tree, but is flat on the front and back. At the widest point the bottle measures 5.5" wide and is 7" tall. This bo...

This is a unique barrel shaped bottle with a maple leaf on the front and a smooth space (approx 1.75" x 2.5") on the back for a label. The bottle m...