Products

2" Stainless Ball Valve

2" Stainless Coupling w/Female Thread.

2" Stainless Short Nipple

These 2" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and will...

2" Stainless Steel Insert Coupling

2" Stainless Tee w/Female Thread

2" Street Elbow 45 Degree

2" Tee w/Female Thread

2" Threaded Plastic Plug

2" Threaded PVC Valve

2" Tri Clamp Ferrule w/1 1/2" Male Pipe Thread

A 2" tri-clamp. This is a replacement clamp for attaching 2 farrels together.

A replacement gasket for the tri-clamp fittings. This gasket goes between 2 farrels then the clamp comes around them to hold everything in place.

2" Triclamp Ferrule w/1" Female Pipe Thread.

2" Triclamp Solid End Cap

2" Vacuum Regulator w/weight

2" Vacuum Swivel Coupling

2" x 1 1/2" Plastic Reducing Bushing

2" x 1 1/2" Plastic Reducing Nipple

2" x 1 1/2" PVC Reducing Bushing (spigot x slip).

2" x 1 1/4" Plastic Reducing Nipple

2" x 1 1/4" PVC Reducing Bushing (spigot x FPT)

2" x 1" PVC Reducing Bushing (spigot x FPT)

A replacement hose that measures 2"x2". These rubber hoses are used to hook a float box on to the evaporator, and can handle the heat of hot sap go...

2" x 2" Mainline Insert Elbow

2" x 2" PVC Female Adapter (FPT x slip)

2" x 2" PVC Male Adapter (MPT x slip)

2" x 2" x 1" Stainless Reducing Insert Tee

2" x 2" x 2" Stainless Steel Insert Y

2" x 3/4" Plastic Reducing Bushing

2" x 3/4" PVC Reducing Bushing (spigot x FPT)

A rubber hose connection that is used on the Leader American pans, as well as some of the older evaporators. These hoses measure 2" in diameter and...

2" x1 1/2" PVC Reducing Bushing (spigot x FPT)

2" x1/4" Stainless Reducing Bushing

2"x1 1/2" Stainless Reducing Bushing

2"x1 1/4" Reducing Insert Coupling

2"x1 1/4" Stainless Reducing Bushing

2"x1" Reducing Insert Coupling.

2"x2 1/2" Stainless Nipple

2"x2" Insert Tee with 1.5" FPT

2"x2"x1 1/2" Reducing Insert Tee

2"x2"x1 1/4" Reducing Insert Tee

2"x4" Stainless Nipple

2' Preheater Pan for Hobby Evaporator. 24" wide x 6" and it is 8" deep/tall.  Has a 1/2" fitting with female threads for a valve. 

A replacement 4 section welded syrup pan. This pan has the wire hangers in it for the Z arm regulator to hook to. Hooks up to a Leader Patriot flue...

This set of pans comes with a 2'x4' raised flue pan and a 2'x2' four section syrup pan. The Flue pan can be ordered with the float box on either si...

2' X 8' H2O HXL Demo Evaporator all Bricked w/H2O pans (used at our Open House with water). It has Cross Flow Pans, Sight Gauge, Window in the door...

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).