Used Equipment

Leader Half Pint Evaporator w/SS Syrup Pan, SS Preheater Pan and Valves. The pans are welded. The back of the arch has been patched around the coll...

4'x4' Welded Stainless Syrup Pan with Tri-Clamp Fittings (like new)

1100 Gallon Plastic Vertical Tank. Rough dimensions on the tank are 87" in diameter and 53" tall. This tank has a fitting on the side near the top ...

Used 2'x2' Smokey Lake Welded Syrup Pan (Grimm copy).

Steam Kettle, Vulcan Hart Corp. Model SL40. We believe it may hold 40 gallons, but not sure of that.

Used Electric Sap Guzzler Diaphragm Vacuum Pump (for up to 300 taps).  Each side has been reduced down to 1". 

3'x3' Waterloo Welded Syrup Pan. There are a few hot spots/dings on the bottom of the pan. 

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

Used 425 Gallon Plastic Pickup Tank. There is a hole in the cover that has been taped over. Comes with a 2" valve on the tank. 

Used 260 +/- Gallon Lapierre Round Bottom Stainless Tank (3'x8'x2'). 

Used 550 Gallon Plastic Vertical Tank

RO Bucket Kit (RB25) for 200 +/- Taps. It has 5 - 8gph membranes. Mounted on a wooden board that is roughly 4' long and from the floor to the top o...

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

Used 16"x16" Leader Gas Canner with SS Pan, Filter Rack, Cover, Valve and Thermometer.

D&G Round Drawoff Tank on Wheels w/Cover (25 +/- gallons). 28.5" from the floor to the top of the cover (not counting the handle). The tank its...

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

Used Marcland Auto-Drawoff with valve and Probe.

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

Used Pump for a Micro1 or Micro2 RO Machine. Customer had it as a spare, but traded in his RO machine towards a larger one. 

Used 225 Gallon Horizontal Plastic Tank with an 8" cover on the top and a 2" drain fitting on the end with a valve and Cam-lock fitting. 

8" Maple Guy's Filter Press (for a Small Producer) w/Papers.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.

Used Marcland Automatic Draw-off with temperature probe and a solenoid valve.