Mainline & Tubing Fittings

Ratchet Twist Wire Tie Tool

Tool for Twisting Wire Ties

3/4" Quick Clamp

These 1/2" stainless steel clamps will only fit on 1/2" pipe. They can be tightened with a regular screwdriver.

These 1" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and will...

These 1 1/4" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and ...

These 1 1/2" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and ...

These 2" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and will...

1/2" Mainline Tension Grip

3/4" Mainline Tension Grip

1" Mainline Tension Grip

1 1/4" Mainline Tension Grip

1 1/2" Mainline Tension Grip

Non-swivel saddle for 3/4" pipe; requires 5/16" hole

Non-swivel saddle for 1" pipe; requires 5/16" hole

Non-swivel saddle for 1 1/4" pipe; requires 5/16" hole

Screw for CDL Multi Fittings

Gasket for Multi-Fitting

If you remove a saddle and are looking for a way to plug the hole this item could be what you are looking for. The gasket will work for a 5/16" up ...

A saddle for 1/2" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which si...

If you remove a saddle and are looking for a way to plug the hole this item could be what you are looking for. The gasket will work for a 5/16" up ...

A saddle for 3/4" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which si...

If you remove a saddle and are looking for a way to plug the hole this item could be what you are looking for. The gasket will work for a 5/16" up ...

A saddle for 1" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which side...