Evaporators & Accessories

A thick white regulator packing that is a spongy rubber material. It is about a 1/4" thick and is 3 3/8" in diameter. Can be used in the hot or col...

This hose is used for hooking a line up to the cold sap float box. Used on the Leader WSE evaporators and also some of the older styles. Stainless ...

A replacement hose that measures 2"x2". These rubber hoses are used to hook a float box on to the evaporator, and can handle the heat of hot sap go...

A rubber hose connection that is used on the Leader American pans, as well as some of the older evaporators. These hoses measure 2" in diameter and...

The elbow for Grimm Raised flue pans or Leader Patriot pans that goes on the 1" threaded nipple that sticks into the syrup pan. This is the elbow t...

A stainless nut used on the Grimm or Leader Patriot evaporators for hooking the flue pan up to the syrup pan. Some of the old nuts we galvanized or...

Small Sap Regulator Bridge.

This is the cold sap regulator for many of the old Small Brothers evaporators where the feed was coming in from the bottom. The bottom of this item...

The Z arm hot sap regulator. This is used on a Grimm evaporator or the Leader Patriots. If you need one of these it is best to call in the order. T...

Small Brothers Flue Pan Regulator Arm

A hot sap regulator for a Small Brothers evaporator. The yoke goes over the elbow and hangs on the 1" feed pipe to the front pan. There is a piece ...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

A regulator arm for a Leader cold sap float box.

A 2" stainless plug used in the Leader Patriot and Leader American evaporators for reversing the flow of sap through the flue pan.

4 oz Soldering Flux

1/3 lb (no lead) Solder (stainless steel & tin solder).

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 24" long and 2....

The Leader grate looks like a single V. It measures 25" long and is 2.5" wide. The ends are about 1.5" thick. This grate was used in the older evap...

The Leader grate looks like a double V. It measures 25" long and is 4.5" wide. The ends are about 1.5" thick.

The Leader grate looks like a double V. It measures 30" long and is 4.5" wide. The ends are about 1.5" thick.

A Leader forced draft grate that is 30" long and 8" wide.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 32" long and 3....

The Leader grate looks like a double V. It measures 36" long and is 4.5" wide. The ends are about 1.5" thick.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 36" long and 3....