Evaporators & Accessories

This is the rubber regulator packing used in a Z arm for a Grimm evaporator or the older Leader Patriot evaporators. This packing was used for the ...

This thin rubber packing is used for the cold sap regulator on many of the Leader and Grimm evaporators. Leader has also started using it on the re...

This regulator packing is a soft material almost like a foam. It is 3/16" thick and 1 3/4" in diameter. It is used on many of the old Small Brother...

A thick white regulator packing that is a spongy rubber material. It is about a 1/4" thick and is 3 3/8" in diameter. Can be used in the hot or col...

A replacement hose that measures 2"x2". These rubber hoses are used to hook a float box on to the evaporator, and can handle the heat of hot sap go...

A rubber hose connection that is used on the Leader American pans, as well as some of the older evaporators. These hoses measure 2" in diameter and...

The elbow for Grimm Raised flue pans or Leader Patriot pans that goes on the 1" threaded nipple that sticks into the syrup pan. This is the elbow t...

A stainless nut used on the Grimm or Leader Patriot evaporators for hooking the flue pan up to the syrup pan. Some of the old nuts we galvanized or...

Small Sap Regulator Bridge.

This is the cold sap regulator for many of the old Small Brothers evaporators where the feed was coming in from the bottom. The bottom of this item...

The Z arm hot sap regulator. This is used on a Grimm evaporator or the Leader Patriots and is designed for the newer style float (#FG3). This Z arm...

Small Brothers Flue Pan Regulator Arm

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

A regulator arm for a Leader cold sap float box.

A 2" stainless plug used in the Leader Patriot and Leader American evaporators for reversing the flow of sap through the flue pan.

4 oz Soldering Flux

1 lb Roll of no lead Solder (stainless steel & tin solder). 

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 24" long and 2....

The Leader grate looks like a single V. It measures 25" long and is 2.5" wide. The ends are about 1.5" thick. This grate was used in the older evap...

The Leader grate looks like a double V. It measures 25" long and is 4.5" wide. The ends are about 1.5" thick.

The Leader grate looks like a double V. It measures 30" long and is 4.5" wide. The ends are about 1.5" thick.

A Leader forced draft grate that is 30" long and 8" wide.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 32" long and 3....

The Leader grate looks like a double V. It measures 36" long and is 4.5" wide. The ends are about 1.5" thick.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 36" long and 3....

The Leader grate looks like a double V. It measures 48" long and is 4.5" wide. The ends are about 1.5" thick.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 48" long and 4"...

A 1.5" tri-clamp. This is a replacement clamp for attaching 2 farrels together.

A 2" tri-clamp. This is a replacement clamp for attaching 2 farrels together.

A replacement gasket for the tri-clamp fittings. This gasket goes between 2 farrels then the clamp comes around them to hold everything in place.

A replacement gasket for the tri-clamp fittings. This gasket goes between 2 farrels then the clamp comes around them to hold everything in place.

1 1/2" Tri Clamp Ferrule w/1 1/4" Male Pipe Thread.

1 1/2" Tri Clamp Ferrule w/1 1/2" Male Pipe Thread.

2" Tri Clamp Ferrule w/1 1/2" Male Pipe Thread

A 1.5" Tri-clamp solid end cap. Great for plugging holes when you take a pan off to clean it. Clamp and gasket sold separate.

2" Triclamp Solid End Cap