Products

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 32" long and 3....

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 36" long and 3....

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 48" long and 4"...

This is the rubber regulator packing used in a Z arm for a Grimm evaporator or the older Leader Patriot evaporators. This packing was used for the ...

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").

Grimm Stainless Soldered Trough for Candy Machine. This is an old soldered trough. No markings or tags on it. 

The Z arm hot sap regulator. This is used on a Grimm evaporator or the Leader Patriots and is designed for the newer style float (#FG3). This Z arm...

This saddle is for 1" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, the ...

H2O 12 Gallon Round Draw-off Tank with Cover (15"x20"). Has a 3/4" female threaded fitting on it. 

H2O 19/64" Blue Spout for 5/16" tubing.

H2O 2 -1 HP Pumps 18"x36" Vertical Electric Releaser with Manifold.

H2O 2" Modulating Automatic Draw-off with Barometric Compensation, Motorized Valve, Controller and Probe. Comes with the down spout. Has a 2" tri-c...

H2O 25 Gallon Round Draw-off Tank (with cover) 21"x26". It has a 3/4" threaded coupling down at the bottom. 

H2O 3" Electric Vortex Deluxe Moisture Trap.

This saddle is for 3/4" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, th...

H2O 36" Precut 5/16" Dropline, Blue. These come nice and straight. However, if we ship them they may get bent to fit in the box and have a small cu...

H2O 5/16" Green Flex Tubing (500' roll). This is a 15 year tubing that is flexible and easy to work with. A great tubing for drop lines, but can be...

H2O 5/16" Tee w/Plug. Does not work with the Leader/H2O redesigned stubby spout. 

H2O Dual Compartment Insulated Draw-off Tank on Wheels. Comes with two 20 Gallon Compartments that have an overflow in them, and sliding covers on ...

H2O Econox 600 RO Machine. The Econox line is designed for producersowning between 1,000 to 15,000 taps- Compact, takes less than 5 sqft of floor ...

H2O Horizontal Electric Vacuum Releaser with Manifold. With a 1/2 hp Submersible pump. Good for pumping up to 10' in elevation and good for roughly...

H2O Releaser Electric Float Switch for a Vertical Releaser. 

H2O Vertical Electric Releaser with 1 HP Pump, 12"x36" (no manifold). 15 gpm pump capable of pumping up to 30' in elevation. Sap inlet height of 21...

H2O Vertical Electric Releaser with 1/2 HP Submersible Pump and a Manifold (12"x36"). The 1/2 HP pump will pump up in elevation 10'. The back manif...