Products

Pure Maple Syrup Products Sold Here Cardboard sign 9" x 13"

Pure Maple Syrup Sold Here All State Sign 18"x24"

Pure Maple Syrup Sold Here MA Sign 18"x24"

Pure Organic Maple Syrup For Sale Here Sign 18"x24"

These are shiny gold stickers with green print. "Quality" and "Product" are printed above and below, respectively, an outline of the state of Vermo...

Quart Airtech Vacuum Pump Oil.

A quart bottle of Atmos 300 defoamer. This defoamer works wonders at keeping the foam down while you are boiling. If you have some defoamer left at...

Quart of Busch VS 150 Gear Oil (for Busch Mink vacuum pump).

A small bag filter used in some RO's for filtering sap. It can be used in other places within a set up for filtering sap as well, although the FPOP...

A raised flue brush designed for cleaning the soot off of the bottom of flue pans. The bristles are a little wide for leader flue pans, but works w...

Ratchet Twist Wire Tie Tool

Refill for Wood Handle Thermometers

This pail of cement is premixed and ready to use.

This pail of cement is premixed and ready to use. On average customers can cement between 100-110 bricks out of a single 50lb pail.

A regulator arm for a Leader cold sap float box.

Repair Kit for 1 Hand Tubing Fitting Tool

RO Cleaner Sodium Hydroxide.

A Filtering unit that uses vacuum to help draw the syrup through a filter. You need a shop-vac or a vacuum pump to create the vacuum, and that help...

Round 9" Vacuum Syrup Filter Press. Good for producers making small amounts of syrup each day. There is not much surface area on one of these filte...

Rubber Gasket/Seal for Blue Plastic 5 Gal Container

Rubber Gloves for Hot Syrup or Water, 12" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

A rubber plunger for the inside of the Solenoid valves. This little rubber piece is what forms the seal inside the solenoid valve.

Each mold has 10 cavities of Santa Claus. This is the whole Santa not just a head. Each Santa measures 1 7/8" wide and is 3" tall. Each cavity hold...

This sight gauge is for the flue pan, and comes with a 1/2" brass gate valve, 12" glass tube, and a stainless bracket to hold the top of the tube. ...

Sap Level Gauge Gasket.

A replacement 1/2" diameter glass tube that is 12" long for a standard sight gauge.

0°-10° Brix

Sap Sak. Holds 2.5+/- Gallons.

Sap Sak Holder

This brush has a long handle and is perfect for cleaning down in between the flues on a flue pan. Whether it is a raised flue or a drop flue, this ...

This sight gauge is for the flue pan, and comes with a 1/2" brass gate valve, 18" glass tube, and a stainless bracket to hold the top of the tube. ...

A replacement brass valve for a sight gauge. This is just the valve that comes with the rubber gasket inside. The valve has 1/2" male threads on it...

A triangled shaped brush designed to get down in between the flues on the back pan. Works with raised or drop flues. 10" from the handle to the bot...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

Screw for CDL Multi Fittings

2" in diameter; 8" tall for use with the Short Syrup Hydrometer

Brix scale. 1°-12°Brix calibrated at 38°F State of Vermont inspected Hydrometers are fragile, glass instruments. They must be handled very cautious...

Baume & Brix scale 25°-40° Baume, 45°-75° Brix. Red lines at hot and cold test. 9 3/8" long - can be used with any of our hydrometer cups, but ...

Sight Level for Mainline

A long handled nylon brush designed to clean the glass sight tubes on evaporators. From the tip of the brush to the end of the handle it measures 24".

Silver Foil Capsules. Sold individually. A silver foil that fits over the cover on a 24mm and 28mm bottle. This foil is pressed on and manually mol...

Fits 3/4", 1", and 1 1/4" mainline pipe; requires 31/64" hole

Single Manifold Saddle w/Elbow - While Supply Lasts

This regulator packing is a soft material almost like a foam. It is 3/16" thick and 1 3/4" in diameter. It is used on many of the old Small Brother...

A hot sap regulator for a Small Brothers evaporator. The yoke goes over the elbow and hangs on the 1" feed pipe to the front pan. There is a piece ...

This is the cold sap regulator for many of the old Small Brothers evaporators where the feed was coming in from the bottom. The bottom of this item...

Small Brothers Flue Pan Regulator Arm

A stainless welded float that is 6 1/8" wide and 12" long. This float is for the flue pan on a Small Brothers evaporator. It has a hole on each sid...