Products

Lapierre 5/16" Clear Seasonal Elbow Spout.

Lapierre 5/16" End Line Tee (left side plugged)

Lapierre 7/16" Stubby Spout.

Lapierre Black 5/16" "Ecolo" Slim Spout

Lapierre Clear Spout Reducer (7/16" to 1/4"). These adapters take a 1/4" hole and will work with the Lapierre or Leader stubby spouts.

Lapierre Clear Spout Reducer (7/16" to 5/16")

Lapierre Drop Line Ring w/Tubing Plug

Lapierre End Line Hooks (red) for 5/16" Tubing.

Lapierre End Line Slide Fitting

Lapierre Multi Fitting Gasket (for Super Saddle)

Lapierre Multi Fitting Super Saddle fits 3/4", 1" and 1 1/4" Pipe (requires a 3/8" hole)

This cream machine features a 1/2 hp motor that runs on 120 V, it now comes with a stainless steel gear pump that mixes the cream, and a valve for ...

Lapierre Straight Tubing Adapter for Spout Reducer - While Supplies Last

With pages for up to 9 years of information, this production log book provides a place to keep your records, such as the number of taps you have an...

Lapierre Tee w/Cup and Tubing Plug

Lapierre Triple Pan Washer w/Tank, 1 HP Gould Pump and 3) 6'x2' Covers w/Spinners.

Large Lollipop Plastic Sucker Mold (3 cavities).

This large mat contains 36 cavities of rabbits. These large rabbits are standing on their hind legs. They measure approximately 2" wide x 4" tall. ...

This rubber mold contains 6 cavities of rabbits. These large rabbits are standing on their hind legs. They measure approximately 2" wide x 4" tall....

The difference between a large scoop and a small scoop is just the width of the scoop. A large scoop is about 5.5" wide, so you would need to make ...

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

Wire Gripple for #9 & #12 Wire.

The Leader grate looks like a single V. It measures 25" long and is 2.5" wide. The ends are about 1.5" thick. This grate was used in the older evap...

The Leader grate looks like a double V. It measures 25" long and is 4.5" wide. The ends are about 1.5" thick.

The Leader grate looks like a double V. It measures 30" long and is 4.5" wide. The ends are about 1.5" thick.

The Leader grate looks like a double V. It measures 36" long and is 4.5" wide. The ends are about 1.5" thick.

The Leader grate looks like a double V. It measures 48" long and is 4.5" wide. The ends are about 1.5" thick.

Leader 1" Mainline Fitting

A complete Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arch is made fr...

Just the firebox for a Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arc...

A stainless preheater/reservoir pan for a Leader 1/2 Pint evaporator. This pan measures 24" wide, 7" long and 7.5" deep. It comes with a valve, and...

A complete Leader 1/2 Pint evaporator with a supreme pan. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. ...

This extension is made to lengthen out a half pint arch so a second pan can be added. This extension is 33" long and will double the length of your...

Leader 2 Stage End Line Ring (for stubby spout and tubing)

Leader 2x4 Vermonter Pan (raised flue)

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

Leader 3/16" Black Spout (Needs a 5/16" drill bit) There may be as many as 33 left.

Leader 5/16 Clear Check Valve Spout

Leader 5/16 Clear Seasonal Spout.

Leader 5/16 Tee w/Plug for Stubby Spout and Tubing

Leader 5/16" Cap

Leader 5/16" Red Check Valve Spout

Leader 5/16" Red Seasonal Spout.

Leader 5/16" Semi-Rigid UNI-50 Dark Blue Tubing, 500' Roll.

Leader 5/16" Slide Fitting.

Leader Black Check Valve Spout Adapter.

Leader Black Spout Reducer (reduces stubby spout from 7/16" to 5/16").

Leader Clear Check Valve Adapter