Products

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

3,141 Gallon Lapierre Stainless Tank (6'Wx16'Lx61 1/2"H). Full steel frame; 2" MPT outlet

3-Way Threaded Manifold Top Only with 5/16" Tubing Barbs

3.75" Stick for Suckers (50/bag)

3/16" Black Tee with Plug.

3/16" Clear Check Valve Seasonal Spout

3/16" Clear Seasonal Spout. Made for a 5/16" tap hole, but the other end is for 3/16" tubing.   

3/16" Slide Fitting (only works on semi rigid tubing).

3/16" Tubing Connector with Hook.

3/16" Two Hand Tubing Tool

3/4" x 500' roll of Black Plastic Mainline.

3/4" - 1 1/2" Mainline Tool. This tool will work on mainline from as small as 3/4" up to 1 1/2". It has adapters to switch out for different sizes.

3/4" Barb to 1 1/2" Tri-clamp Adapter

3/4" Barbed Plastic Cross

3/4" Barbed x 3/4" FPT Adapter

3/4" Brass Check Valve w/Female Thread

3/4" Bulkhead Fitting

If you remove a saddle and are looking for a way to plug the hole this item could be what you are looking for. The gasket will work for a 5/16" up ...

A light blue high density pipe that is similar to working with black water pipe. Due to the light, translucent material, you are able to see the sa...

3/4" Clear Hose

3/4" Clear Plastic Check Valve

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

A replacement gasket for a 3/4" bung. These black rubber gaskets will fit almost any 3/4" bung.

3/4" Drum Over Flow Control U Tube.

3/4" Insert Plug

3/4" Leader Mainline Y

3/4" Mainline Combo Elbow (3/4" insert x 3/4" male thread)

3/4" Mainline Combo Tee (3/4" insert x 3/4" male thread x 3/4" insert)

3/4" Mainline Coupling

3/4" Mainline End Elbow (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Manifold Top)

3/4" Mainline Insert Elbow

3/4" Mainline Insert Tee

A saddle for 3/4" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which si...

3/4" Mainline Tee (Bottom w/ 1/2" Threaded Hole to Fit Threaded Manifold Top)

3/4" Mainline Tee with 5/16" Tubing Barbs. 

3/4" Mainline Tension Grip