Products

2" Threaded Plastic Plug

2" Threaded PVC Valve

2" Tri Clamp Ferrule w/1 1/2" Male Pipe Thread

A 2" tri-clamp. This is a replacement clamp for attaching 2 farrels together.

A replacement gasket for the tri-clamp fittings. This gasket goes between 2 farrels then the clamp comes around them to hold everything in place.

2" Triclamp Ferrule w/1" Female Pipe Thread.

2" Triclamp Solid End Cap

2" Vacuum Regulator w/weight

2" Vacuum Swivel Coupling

2" x 1 1/2" Plastic Reducing Bushing

2" x 1 1/2" Plastic Reducing Nipple

2" x 1 1/2" PVC Reducing Bushing (spigot x slip).

2" x 1 1/4" Plastic Reducing Nipple

2" x 1 1/4" PVC Reducing Bushing (spigot x FPT)

2" x 1" PVC Reducing Bushing (spigot x FPT)

A replacement hose that measures 2"x2". These rubber hoses are used to hook a float box on to the evaporator, and can handle the heat of hot sap go...

2" x 2" Mainline Insert Elbow

2" x 2" PVC Female Adapter (FPT x slip)

2" x 2" PVC Male Adapter (MPT x slip)

2" x 2" x 1" Stainless Reducing Insert Tee

2" x 2" x 2" Stainless Steel Insert Y

2" x 3/4" Plastic Reducing Bushing

2" x 3/4" PVC Reducing Bushing (spigot x FPT)

A rubber hose connection that is used on the Leader American pans, as well as some of the older evaporators. These hoses measure 2" in diameter and...

2" x1 1/2" PVC Reducing Bushing (spigot x FPT)

2" x1/4" Stainless Reducing Bushing

2"x1 1/2" Stainless Reducing Bushing

2"x1 1/4" Reducing Insert Coupling

2"x1 1/4" Stainless Reducing Bushing

2"x1" Reducing Insert Coupling.

2"x2 1/2" Stainless Nipple

2"x2" Insert Tee with 1.5" FPT

2"x2"x1 1/2" Reducing Insert Tee

2"x2"x1 1/4" Reducing Insert Tee

2"x4" Stainless Nipple

2' Preheater Pan for Hobby Evaporator. 24" wide x 6" and it is 8" deep/tall.  Has a 1/2" fitting with female threads for a valve. 

A replacement 4 section welded syrup pan. This pan has the wire hangers in it for the Z arm regulator to hook to. Hooks up to a Leader Patriot flue...

This set of pans comes with a 2'x4' raised flue pan and a 2'x2' four section syrup pan. The Flue pan can be ordered with the float box on either si...

2' X 8' H2O HXL Demo Evaporator all Bricked w/H2O pans (used at our Open House with water). It has Cross Flow Pans, Sight Gauge, Window in the door...

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

A replacement 2'x2' syrup pan for either a 2'x4' or a 2'x6' Leader WSE evaporator. This is a 3 section welded syrup pan. It does not come with a va...

Ideal for up to 50 taps Evaporates up to 7 GPH 2-in-1 solution No bricking needed Includes: 2′ x 3′ stainless steel pan 3/4′ stainless steel ball...

2'x3' Hobby Evaporator with Welded Pans. This evaporator is designed for someone with 15-50 taps. It has a 3 section stainless pan, and a 1/2" fitt...

2'x3' Stainless Suspended Hood. This hood has a drip channel on the inside, but no drain for it. 8" thimble on the top. 

2'x3' Welded Raised Flue Pan. Made by Leader. This pan does not have a float box and only has 1 fitting on the front bottom right corner. The pan i...

2'x3' Welded Syrup Pan with a 1/2" draw-off fitting and a 1/4" fitting for a thermometer.  Draw-off valve and thermometer are sold separate. 

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...