All Products [hidden]

CDL 7/16" Tubing Spout

A hydrotherm combines a hydrometer and a thermometer into one unit. Just float the hydrotherm in syrup and when the red/blue line is level with the...

A flat hang tag with a pre-punched hole in the upper left hand corner. "The World's Best All Natural Sweetener 100% Pure Maple Syrup" is printed on...

Brix scale, 1°-12° Brix calibrated at 38° F. Divided into 1/10° Brix increments. State of Vermont inspected Hydrometers are fragile, glass instrume...

New/replacement wires for flat bucket covers. These are designed specifically for the flat metal covers.

Middle Valley Clear 5/16" Arc Barbed Spout. The Barbed end goes into the tree for a better seal without blocking off so much wood in the tap hole. ...

A 1/2 pound plastic cream jar made by Sugarhill.  There is no state name on these jars so anyone can use them, and just add their own name and info...

3-Way Threaded Manifold Top Only with 5/16" Tubing Barbs

This is the medium-sized maple leaf. There are 12 cavities in a mold. Each maple leaf is 1 ounce of candy. They measure 1 7/8" wide x 1 7/8" tall. ...

Screw for CDL Multi Fittings

5/16" Leader/H2O End Line Tee w/Right Hand Plug (red).

12" tall; 2" diameter

Tool for Twisting Wire Ties

This is a unique barrel shaped bottle with a maple leaf on the front and a smooth space (approx 1.75" x 2.5") on the back for a label. The bottle m...

This is an almond Sugarhill plastic jug with a colored sugaring scene wrapped around it. The jug does not have a state name printed on it, so it ma...

Aluminum Spout Hammer

A saddle for 1/2" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which si...

There is a decorative bottle with small handle on the bottle and a maple leaf engraved both the front and back of the bottle. The bottle measures a...

A box of 500 papers 7" papers for a filter press. Does NOT fit the plastic filter presses.

This is a Sugarhill plastic jug, printed for New Hampshire. The jug itself is grey, rather than almond, and the printed sugar house scene is brown....

A decorative bottle with a maple leaf on the front. The bottle has a base of 2.75" x 1.75", with a height of 10", and holds 500 ml or 16.9 ounces. ...

A rubber mold in the shape of a small maple leaf. This mold has 160 cavities with each cavity holding 1/3 oz of candy. Each leaf measures 1 3/8" wi...

You must be a member of the VT Sugar Makers Association to buy these jugs! This is an almond Sugarhill plastic jug, labeled for the Vermont Sugar M...

1/2" stainless ball valve

Our smallest candy cup size; great for dressing up your small maple candies. Color: Red Sold by packages of 100

This thin rubber packing is used for the cold sap regulator on many of the Leader and Grimm evaporators. Leader has also started using it on the re...

Leader Tubing Support

A plain white candy box with a clear window on the front. These candy boxes measure 5/8" x 2" x 4 1/4" and holds a 1.5oz candy Santa. Sold individu...

A dry powder defoamer for your evaporator. Just sprinkle a few grains into the evaporator to keep the foam down in the pans. Works well with the de...

4-Way Threaded Mainifold Top Only with 5/16" Tubing Barbs

If you remove a saddle and are looking for a way to plug the hole this item could be what you are looking for. The gasket will work for a 5/16" up ...

3/4" Stainless Steel Insert Coupling

Insulating Arch Board 1" thick by 12" wide and 3' long. The arch board is used to line the arch before the firebrick is placed in the arch. It is s...

This is a Sugarhill plastic jug, printed for New Hampshire. The jug itself is grey, rather than almond, and the printed sugar house scene is brown....

All new containers come with caps. A black replacement cover that fits the Folia glass, either the 250 ml or 500 ml bottles. *White covers are also...

5/16" Waterloo Cap.