All Products [hidden]

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

A complete Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arch is made fr...

16"x48" Lapierre Propane Evaporator w/Welded (raised flue) Pans and three 65,000 btu Burners

Small Brothers Flue Pan Regulator Arm

This is a new 4'x4' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

16" x 24" Canner Shelf Only

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

Plastic Ring for 7" Hand Pump on Filter Press

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

This CDL cream machine with a 3/4 hp stainless steel pump running on 110 V is capable of making up to 1.5 gallons of cream at a time. This cream ma...

This cream machine features a 1/2 hp motor that runs on 120 V, it now comes with a stainless steel gear pump that mixes the cream, and a valve for ...

This would be just the pig for a Grimm/Leader candy machine. This pan is welded and has the valve on the snout.

This rubber candy mold mat contains 80 cavities of a little man. Each cavity measures 1 1/8" wide x 3" tall. Pairs nicely with the little maid (CML...

This rubber candy mold contains 80 cavities of a little maid. Each cavity measures 1 1/4" wide x 2 3/4" tall. Pairs nicely with the little man (CML...

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

Used 2 HP Single Phase Atlantic Fluid Oil Cooled Vacuum Pump. 

1 1/2" Black Plastic Mainline (500' Roll). The ID is 1 1/2". This pipe is rated for 125 psi.

40 Gallon Lapierre Water Jacketed Canner with Stand. Comes with 4 bottling valves, 2 heating elements and sight gauges for syrup and the water leve...

Used 18" Stainless Steam Stack. 3' section.

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.

Used 1.5" Stainless Triclamp Ball Valve.

Used Hanna Light Transmittance Machine with 28+/- Vials

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

This set of pans comes with a 2'x4' raised flue pan and a 2'x2' four section syrup pan. The Flue pan can be ordered with the float box on either si...

12" SS Collar only for a Roof Jack.

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.

Used 425 Gallon Plastic Pickup Tank. There is a hole in the cover that has been taped over. Comes with a 2" valve on the tank. 

1100 Gallon Plastic Vertical Tank. Rough dimensions on the tank are 87" in diameter and 53" tall. This tank has a fitting on the side near the top ...

Airablo Electric Vacuum Pump, 8 cfm with moisture trap. This pump is only pulling 16-18" and is sold as is. It may be an easy fix, but we have not ...

Used 80 GPM Flow Meter.

Filler Nozzle for Bottling Unit. Price is for each nozzle. Different sizes and condition. Some may be missing parts. Open to offers on the whole lot.

12"x16" Vertical Vacuum Booster. Both ends are screwed on. Open to offers on this item.